servo_micro_v1.1.9140-27e9ca8e6

+ PORT=9999
+ dut-control -p 9999 servo_micro_version
servo_micro_version:servo_micro_v1.1.9140-27e9ca8e6
+ dut-control -p 9999 cold_reset:on spi2_vref:pp1800 spi2_buf_en:on
+ sudo flashrom -n -p raiden_debug_spi:port=9999 -w /build/kukui/firmware/image.serial.bin -V
...
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE
This flash part has status UNTESTED for operations: UNBOUNDED READ
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No -i argument is specified, set ignore_fmap.
Read is not working on this chip. Aborting.
FAILED
restore_power_management: Re-enabling power management.
+ dut-control -p 9999 cold_reset:off spi2_vref:off spi2_buf_en:off

These exact commands used to work with:
servo_micro_v1.1.5739-a4ab463