As i test on M-65 10295.0.0 ,I don't see the issue happening on this build

Yes, I tested caroline-release/R65-10297.0.0 too today. The problem has been fixed on ToT. Let's close this issue.

Pramod, thanks for testing it!

Does seeing a continuous stream of messages like the following count as "bluetooth discovery"? If so, then I see this even on 10337.0.0 (tested on Soraka). The bluetooth setting wiondow is not displayed, but these messages are seen on btmon. Note that this is a problem because this might cause failure to suspend if a BT mouse is connected (as the bluetooth is then considered a wakeup source). 

> HCI Event: LE Meta Event (0x3e) plen 43                                                                                                                                                         [hci0] 22.745783
      LE Advertising Report (0x02)
        Num reports: 1
        Event type: Non connectable undirected - ADV_NONCONN_IND (0x03)
        Address type: Random (0x01)
        Address: 2C:59:61:8E:3E:19 (Non-Resolvable)
        Data length: 31
        Company: Microsoft (6)
          Data: 010920008388de13fffddb42d4026632095d3c1cd3551634ddf35a
        RSSI: -72 dBm (0xb8)
> HCI Event: LE Meta Event (0x3e) plen 27                                                                                                                                                         [hci0] 22.770913
      LE Advertising Report (0x02)
        Num reports: 1
        Event type: Connectable undirected - ADV_IND (0x00)
        Address type: Public (0x00)
        Address: 04:52:C7:0D:26:E3 (OUI 04-52-C7)
        Data length: 15
        Flags: 0x1a
          LE General Discoverable Mode
          Simultaneous LE and BR/EDR (Controller)
          Simultaneous LE and BR/EDR (Host)
        16-bit Service UUIDs (complete): 1 entry
          Bose Corporation (0xfebe)
        Company: SGL Italia S.r.l. (784)
          Data: 400c0350
        RSSI: -77 dBm (0xb3)
> HCI Event: LE Meta Event (0x3e) plen 25                                                                                                                                                         [hci0] 22.796786
      LE Advertising Report (0x02)
        Num reports: 1
        Event type: Connectable undirected - ADV_IND (0x00)
        Address type: Random (0x01)
        Address: CA:04:C5:63:1F:AE (Static)
        Data length: 13
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported
        16-bit Service UUIDs (complete): 1 entry
          Google (0xfef4)
        Name (short): gBV3
        RSSI: -83 dBm (0xad)
> HCI Event: LE Meta Event (0x3e) plen 43                                                                                                                                                         [hci0] 22.845796
      LE Advertising Report (0x02)
        Num reports: 1
        Event type: Non connectable undirected - ADV_NONCONN_IND (0x03)
        Address type: Random (0x01)
        Address: 2C:59:61:8E:3E:19 (Non-Resolvable)
        Data length: 31
        Company: Microsoft (6)
          Data: 010920008388de13fffddb42d4026632095d3c1cd3551634ddf35a
        RSSI: -65 dBm (0xbf)

 Issue 805797  has been merged into this issue.

Hi rajatja@, could you describe how you reproduced the issue? Is it always reproducible?

It would be helpful if you could attach /var/log/messages next time you see the issue again, and even better with the btmon log. Thanks!

Has the root cause been identified?   Need to triage / prioritize given RBS status for M64.

Being on the settings page only makes us scan, not advertise. However, we do advertise at many other times due to the better together features. These reports are of advertising.

If you do see 'scanning' continue after closing the settings page, then please do re-open this bug, otherwise it seems that this has been fixed.

[Auto-generated comment by a script] We noticed that this issue is targeted for M-65; it appears the fix may have landed after branch point, meaning a merge might be required. Please confirm if a merge is required here - if so add Merge-Request-65 label, otherwise remove Merge-TBD label. Thanks.

Hi Rajat, I just tested 10337.0.0 on Coral and did not find the problem that you described. If you still observed the problem, please let us know the steps that you reproduce it. Thanks!

 Issue 809310  has been merged into this issue.