Samus won't boot up after power ON. Overnight charged but still not boot up.
Please find the ec console logs after power on and ec reset (refresh+power)
> battery
Status: 0x00e0 FULL DCHG INIT
Param flags:00000002
Temp: 0x0bd2 = 302.6 K (29.5 C)
V: 0x219b = 8603 mV
V-desired: 0x0000 = 0 mV
I: 0xfe35 = -459 mA(DISCHG)
I-desired: 0x0000 = 0 mA
Charging: Not Allowed
Charge: 100 %
Manuf: SMP-ATL
Device: A55
Chem: LION
Serial: 0x0544
V-design: 0x1db0 = 7600 mV
Mode: 0x6001
Abs charge:97 %
Remaining: 9226 mAh
Cap-full: 9270 mAh
Design: 9515 mAh
Time-full: 0h:0
Empty: 20h:3
> [156.377840 KB disable_scanning_mask changed: 0x00000002]
[156.408192 power button pressed]
[156.408518 PB pressed]
[156.408681 PB task 1 = pressed]
[156.408870 PB PCH pwrbtn=LOW]
[156.409039 PB task 2 = t0, wait 31643]
[156.409667 SW 0x07]
[156.440972 PB task 2 = t0]
[156.441284 PB PCH pwrbtn=HIGH]
[156.441455 PB task 3 = t1, wait 3967518]
[156.520949 KB disable_scanning_mask changed: 0x00000000]
[156.521359 KB poll]
[156.522116 KB wait]
[156.522336 power button released]
[156.522525 PB released]
[156.522693 PB task 6 = released]
[156.522883 PB PCH pwrbtn=HIGH]
[156.523055 PB task 0 = idle, wait -1]
[156.523654 SW 0x05]
[176.743354 KB disable_scanning_mask changed: 0x00000002]
[176.773707 power button pressed]
[176.774033 PB pressed]
[176.774196 PB task 1 = pressed]
[176.774385 PB PCH pwrbtn=LOW]
[176.774554 PB task 2 = t0, wait 31643]
[176.775182 SW 0x07]
[176.806487 PB task 2 = t0]
[176.806826 PB PCH pwrbtn=HIGH]
[176.807027 PB task 3 = t1, wait 3967461]
--- UART initialized after reboot ---
[Reset cause: reset-pin]
[Image: RO, samus_v1.7.703-f30d79f 2015-12-30 12:01:34 @build120-m2]
[0.001374 Port 80: 0x1002][0.001523 LPC RESET# asserted]
[0.002692 PB init-on]
[0.003212 SW 0x07]
[0.003413 USB charge p0 m0]
[0.003570 USB charge p1 m0]
[0.014750 hash start 0x00020000 0x00019dc4]
[0.015063 Inits done]
[0.015202 KB init state: -- -- -- 40 -- -- -- -- -- -- -- -- --]
[0.015529 KB wait]
[0.015727 KB poll]
[0.016615 PB task 8 = init-on]
Console is enabled; type HELP for help.
> [0.017035 event set 0x00002000]
[0.017246 hostcmd init 0x2000]
[0.018589 power state 0 = G3, in 0x000b]
[0.018822 power state 4 = G3->S5, in 0x000b]
[0.020366 LB task starting]
[0.020648 LB state initialized]
[0.020793 LB running cur_seq 1 S5. prev_seq 1 S5]
[0.034517 PB PCH pwrbtn=LOW]
[0.034670 PB task 9 = recovery, wait 199995]
[0.042022 event set 0x00200000]
[0.132588 event set 0x00000080]
[0.132906 event set 0x00400000]
[0.134393 Battery 100% / 20h:3 to empty, not accepting current]
[0.156014 LB_bright 0xff]
[0.167307 LB_off]
[0.203622 power state 1 = S5, in 0x0089]
[0.204395 power state 5 = S5->S3, in 0x01d9]
[0.207604 LB lightbar_startup() requests 4 S5S3]
[0.207851 power state 2 = S3, in 0x01f3]
[0.208172 power state 6 = S3->S0, in 0x01f3]
[0.209262 LB cur_seq 1 S5 returned pending msg 4 S5S3]
[0.209512 LB running cur_seq 4 S5S3. prev_seq 1 S5]
[0.209950 LB_init_vals]
[0.225195 LB_on]
[0.225698 LB cur_seq 4 S5S3 returned pending msg 2 S3]
[0.225949 LB running cur_seq 2 S3. prev_seq 4 S5S3]
[0.227117 LB_off]
[0.227888 LB_init_vals]
[0.229391 Port 80: 0x1001][0.229695 LB lightbar_resume() requests 5 S3S0]
[0.230874 USB charge p0 m2]
[0.231097 USB charge p1 m2]
[0.234986 PB task 9 = recovery]
[0.235157 PB PCH pwrbtn=HIGH]
[0.236109 PB task 7 = eat-release, wait -1]
[0.238151 Base: MS Done Init type:0x0 range:2 odr:119000]
[0.239876 power state 3 = S0, in 0x01fb]
[0.249190 Lid: Done Init type:0x0 range:2 rate:100000]
[0.253335 Base Gyro: MS Done Init type:0x1 range:2000 odr:119000]
[0.278349 LB cur_seq 2 S3 returned pending msg 5 S3S0]
[0.278744 LB running cur_seq 5 S3S0. prev_seq 2 S3]
[0.280222 LB_init_vals]
[0.296460 LB_on]
[0.297085 LB_bright 0xcc]
[0.306186 LPC RESET# deasserted]
[0.404577 power button released]
[0.406353 PB ignoring release]
[0.411930 SW 0x05]
[1.045225 low power idle task started]
[1.290581 KB wait]
[1.290866 KB poll]
[1.291608 KB wait]
[1.508563 hash done cb93994d25ccffad691ee3c5b7a733f1217412a22a3f62a567d7bc87d15919ed]
[2.538041 LB cur_seq 5 S3S0 returned pending msg 3 S0]
[2.538440 LB running cur_seq 3 S0. prev_seq 5 S3S0]
[2.543023 LB_on]
[4.652983 Port 80: 0x1002][4.653224 LPC RESET# asserted]
[4.659015 LPC RESET# deasserted]