New issue
Advanced search Search tips
Note: Color blocks (like █ or █) mean that a user may not be available. Tooltip shows the reason.

Issue 626132 link

Starred by 2 users
Status: Verified
Owner:
█ jongkyuj@chromium.org
Email to this user bounced
Closed: Jul 2016
Cc:
█ dschimmels@chromium.org
█ jashur@chromium.org
aashuto...@chromium.org
Components:
EstimatedDays: ----
NextAction: ----
OS: Chrome
Pri: 2
Type: Bug



Sign in to add a comment

[B1758] Replace Sentry DVT with PVT and setup conductive rig

Project Member Reported by tienchang@chromium.org, Jul 6 2016 
Steps:
  Verify device (asset tag: C051231) powers on and boots
  Switch dev mode
  Install ToT test image
  Confirm write-protect is disabled (flashrom -p host --wp-status; flashrom -p ec --wp-status; flashrom -p ec:dev=1 --wp-status (only for Type-C devices))
  Check for servo debug header
  Install servo cable
  Install pigtails
  Verify no firmware screen on boot
  Install factory firmware (chromeos-firmwareupdate --mode=factory)
  Boot test image in dev mode (3 finger, insert USB w/ test image)
  Run chromeos-tpm-recovery to clear TPM; reboot
  Switch to normal mode (/usr/share/vboot/bin/setgbbflags.sh 0)
  Run network_WiFi_VerifyRouter on test-station
  Connect servo and run platform_InstallTestImage on test-station
  Replace device in B1758 at android1758-row4-rack2-host1 
  Update autotest with labels: conductive:True
  Add brick of power splitters
  Add conductive AP
  Run network_WiFi_VerifyRouter in B1758
  Run platform_InstallTestImage in B1758
  Return Sentry DVT to white cabinet
  Update spreadsheet (go/wifi-device-life-cycle)

Comment 1 by jongkyuj@google.com, Jul 14 2016

Status: Started (was: Assigned)
 Verify device (asset tag: C051231) powers on and boots Done
 Switch dev mode Done

Comment 2 by jongkyuj@google.com, Jul 14 2016 

Install ToT test image DOne
Confirm write-protect is disabled (flashrom -p host --wp-status; flashrom -p ec --wp-status; flashrom -p ec:dev=1 --wp-status (only for Type-C devices)) Done
  Check for servo debug header Done
  Install servo cable Done
  Install pigtails Done

Comment 3 by jongkyuj@google.com, Jul 14 2016 

Install factory firmware (chromeos-firmwareupdate --mode=factory) Done

Comment 4 by jongkyuj@google.com, Jul 21 2016 

Verify device (asset tag: C051316) powers on and boots Done
The asset tag has been changed with replacement. 
The original one went bad.

Comment 5 by jongkyuj@google.com, Jul 22 2016 

Verify device (asset tag: C051231) powers on and boots Done
Switch dev mode Done
Install ToT test image Done
Confirm write-protect is disabled (flashrom -p host --wp-status; flashrom -p ec --wp-status; flashrom -p ec:dev=1 --wp-status (only for Type-C devices)) Done
Verify no firmware screen on boot Done
Install factory firmware (chromeos-firmwareupdate --mode=factory) Done
Boot test image in dev mode (3 finger, insert USB w/ test image) Done
Run chromeos-tpm-recovery to clear TPM; reboot Done
Switch to normal mode (/usr/share/vboot/bin/setgbbflags.sh 0) Done

Comment 6 by jongkyuj@google.com, Jul 22 2016 

Run network_WiFi_VerifyRouter on test-station Done

------------------------------------------------------------------------------------------------------
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter                           [  PASSED  ]
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter [  PASSED  ]
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_1_ch_149                                                               -21
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_1_ch_6                                                                 -16
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_2_ch_149                                                               -59
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_2_ch_6                                                                 -10
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_3_ch_149                                                               -24
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_3_ch_6                                                                 -13
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_1_ch_149                                                               -21
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_1_ch_6                                                                 -17
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_2_ch_149                                                               -59
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_2_ch_6                                                                 -10
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_3_ch_149                                                               -24
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_3_ch_6                                                                 -14
-------------------------------------------------------------------------------------------------------
Total PASS: 2/2 (100%)

Comment 7 by jongkyuj@google.com, Jul 22 2016 

Connect servo and run platform_InstallTestImage on test-station Done

-------------------------------------------------------------------------------------------------------
/tmp/test_that_results_qVHgX2/results-1-platform_InstallTestImage                           [  PASSED  ]
/tmp/test_that_results_qVHgX2/results-1-platform_InstallTestImage/platform_InstallTestImage [  PASSED  ]
-------------------------------------------------------------------------------------------------------
Total PASS: 2/2 (100%)

Comment 8 by jongkyuj@google.com, Jul 22 2016 

The network_WiFi_VerifyRouter and platform_InstallTestImage test passed with conductive test bed in crux. Will run the same test from 1758.

tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter                           [  PASSED  ]
/tmp/test_that_results_JQVicP/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter [  PASSED  ]
/tmp/test_that_results_qVHgX2/results-1-platform_InstallTestImage                           [  PASSED  ]
/tmp/test_that_results_qVHgX2/results-1-platform_InstallTestImage/platform_InstallTestImage [  PASSED  ]
-------------------------------------------------------------------------------------------------------
Total PASS: 2/2 (100%)

Comment 9 by jongkyuj@google.com, Jul 22 2016 

Run network_WiFi_VerifyRouter in B1758 Done


tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter                           [  PASSED  ]
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter [  PASSED  ]
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_1_ch_149                                                               -77
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_1_ch_6                                                                 -50
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_2_ch_149                                                               -36
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_2_ch_6                                                                 -33
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_3_ch_149                                                               -39
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_0_bm_3_ch_6                                                                 -36
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_1_ch_149                                                               -78
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_1_ch_6                                                                 -49
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_2_ch_149                                                               -36
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_2_ch_6                                                                 -33
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_3_ch_149                                                               -39
/tmp/test_that_results_nwwb_x/results-1-network_WiFi_VerifyRouter/network_WiFi_VerifyRouter   signal_for_ap_1_bm_3_ch_6                                                                 -34
-------------------------------------------------------------------------------------------------------
Total PASS: 2/2 (100%)

Comment 10 by jongkyuj@google.com, Jul 22 2016

Status: Fixed (was: Started)
Install servo cable Done
Install pigtails Done
Add brick of power splitters Done
Add conductive AP Done
Run platform_InstallTestImage in B1758 Done

-------------------------------------------------------------------------------------------------------
/tmp/test_that_results__8webS/results-1-platform_InstallTestImage                           [  PASSED  ]
/tmp/test_that_results__8webS/results-1-platform_InstallTestImage/platform_InstallTestImage [  PASSED  ]
-------------------------------------------------------------------------------------------------------
Total PASS: 2/2 (100%)

Comment 11 by jongkyuj@google.com, Jul 23 2016

Status: Verified (was: Fixed)
Update autotest with labels: conductive:True Done
Return Sentry DVT to white cabinet Done
Update spreadsheet (go/wifi-device-life-cycle) Done

jongkyuj@jongkyuj0:~$ ping android1758-row4-rack2-host1
PING android1758-row4-rack2-host1.cros.corp.google.com (100.107.127.77) 56(84) bytes of data.
64 bytes from dhcp-100-107-127-77.mtv.corp.google.com (100.107.127.77): icmp_seq=1 ttl=60 time=0.970 ms
64 bytes from dhcp-100-107-127-77.mtv.corp.google.com (100.107.127.77): icmp_seq=2 ttl=60 time=1.00 ms
^C
--- android1758-row4-rack2-host1.cros.corp.google.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 0.970/0.985/1.001/0.035 ms
jongkyuj@jongkyuj0:~$ ping android1758-row4-rack2-host1-router
PING android1758-row4-rack2-host1-router.cros.corp.google.com (100.107.127.78) 56(84) bytes of data.
64 bytes from dhcp-100-107-127-78.mtv.corp.google.com (100.107.127.78): icmp_seq=1 ttl=60 time=0.820 ms
^C
--- android1758-row4-rack2-host1-router.cros.corp.google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.820/0.820/0.820/0.000 ms
jongkyuj@jongkyuj0:~$ ^C
jongkyuj@jongkyuj0:~$ ping android1758-row4-rack2-host1-servo
PING android1758-row4-rack2-host1-servo.cros.corp.google.com (100.107.127.79) 56(84) bytes of data.
64 bytes from dhcp-100-107-127-79.mtv.corp.google.com (100.107.127.79): icmp_seq=1 ttl=60 time=0.838 ms
64 bytes from dhcp-100-107-127-79.mtv.corp.google.com (100.107.127.79): icmp_seq=2 ttl=60 time=0.809 ms
^C
--- android1758-row4-rack2-host1-servo.cros.corp.google.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 0.809/0.823/0.838/0.032 ms
jongkyuj@jongkyuj0:~$ ping android1758-row4-rack2-host1-pcap
PING android1758-row4-rack2-host1-pcap.cros.corp.google.com (100.107.127.80) 56(84) bytes of data.
64 bytes from dhcp-100-107-127-80.mtv.corp.google.com (100.107.127.80): icmp_seq=1 ttl=60 time=0.808 ms
64 bytes from dhcp-100-107-127-80.mtv.corp.google.com (100.107.127.80): icmp_seq=2 ttl=60 time=1.05 ms
^C
--- android1758-row4-rack2-host1-pcap.cros.corp.google.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 0.808/0.931/1.054/0.123 ms
►

Sign in to add a comment